Jump to content

Sub70 golf


Sluggo42

Recommended Posts

I talked with Jason and ordered one the other day. Should ship by Friday and be here next week. We took the 56 degree and bent the loft one degree to get to 55 degrees. In doing this it also changed the bounce from 12 degrees to 11. Then went with a heavier shaft and soft tipped it. The Gap wedge on the 699 Pro series that I play is 50 degrees and I love having a 60 degree in the bag. This gets me an even spread. 50 - 55 - 60. The satin finish wasn't available yet so I went with the black. The Cleveland CBX 56/12 that I currently play was not always reliable in hard pack sand or tight lies. So with the special grind sole on the JB wedge I should have a more versatile club.

 

  • Like 6

:ping-small: Driver, G400 11* SR Flex

:taylormade-small: 3 Wood, SLDR  HL 17*  R Flex

:taylormade-small: 5 Wood, SLDR 19* R Flex

:cobra-small: 7 Wood, F6 22.5* R Flex

:Sub70: Irons, 699 Pro's S Flex (5 - AW)

:Sub70:  JB Wedge 56*

:cleveland-small: Wedge, CBX 60*

:odyssey-small: Putter, Marksman Fang 35"

Link to comment
Share on other sites

I know it’s just like, my opinion, but since Sub70 is involved in this thread I just wanted to say the fish scale milling looks atrocious. The MB’s/CB’s would look so much better if they either had the straight lines and smooth areas like the 699’s or the tighter milling pattern like on the JB wedges. 

Sun Mountain C130-S / Titleist TSi4 8.25* PX HZRDUS Smoke Black RDX 70 TX / Titleist TSi3 14.25* PX HZRDUS Smoke Black RDX 80 TX / New Level NLU-01 18* PX HZRDUS Smoke Black RDX 100 6.5 / New Level 902 Forged 4-PW DG TI X100 / Vokey SM8 50,54,58 DGS200 / Scotty Cameron Special Select Newport 2

Humble, TX / Right Handed / 10 Handicap / 37.5" 6i @ 61.5* Lie

Link to comment
Share on other sites

Who here is gaming the 699U in a 3 or a 2i and if you are are you still liking it? Thinking of selling my 0311X 2I and getting a 3 UI from somewhere with the same shaft as my 0211s.

  • Like 2

Driver: :callaway-small:   Epic Max LS with RDX Blue 70g S 

2H: :callaway-small: Super Hybrid with Tensei Orange Pro Hyb 80 Stiff 

3H: :Sub70: 939X UST proforce V2 black F3 hybrid soft stepped XStiff 

4-AW: th.jpg.d6e2abdaeb04f007fd259c979f389de6.jpg  0211  with KBS Tour Stiff 2.5* up 1/4" long Unofficial Review

Wedges     :cleveland-small: Zipcore Tour Rack 54/full and 58/mid (review here)  (Backup 54*,60*: :ping-small:  S Tour KBS Tour Stiff 3* up)

Putter: TAII #2  Review here: TAIII Impact #2 Putter 

Ball: :Snell:MTB-X and :OnCore: vero X1 (may dabble in :titelist-small: proV1 at some point)

 

 

 

Link to comment
Share on other sites

1 hour ago, rbsiedsc said:

Who here is gaming the 699U in a 3 or a 2i and if you are are you still liking it? Thinking of selling my 0311X 2I and getting a 3 UI from somewhere with the same shaft as my 0211s.

I got a 699u 2i back in October. Played 4 rounds with it. Using it mainly off the tee box and loving the bullets I’m hitting with it. Finding it easy to flight high and low. Feel is meh to me but performance and forgiveness is top notch. Finding as my go to club for par 5 approaches because I know I’m going to get it down to the hole and keep it in play unlike my hybrids and woods 

  • Like 5
Link to comment
Share on other sites

On 1/8/2021 at 10:51 AM, bens197 said:

Would love to see some address photos!

Ill try and get some today.

  • Like 2

Driver: Taylormade M6 10.5*

FW: Callaway Steelhead Plus 4 wood

Hybrid: 18* 2 & 22* 4 Sub 70 949

Irons:  Sub 70 

639 CB 5 - 6

639 MB 7 - PW

Wedges: Sub 70

JB - 50* 54* & 60*

Putter: Odyssey 2-Ball Ten Arm Lock
Ball: Titleist Pro V1X
Handicap index:  +2.9

Instagram: joshandersongolf

Twitter: @jacustomgolf

Link to comment
Share on other sites

  • 2 weeks later...

Love Sub70! 

  • Like 2

Driver- Cobra Speedzone 9° default_cobra-small.jpg.bf0039c0fa211a003217e70e184035fa.jpg

Woods- Sub70 Pro 5-Wood   08e84065c69a5a06ed8fec52d91a.jpg.08662cdc8041ba1124fe725b926a5e95.jpg  

Utility- Titleist 718 T-MB 4 Utility  default_titelist-small.jpg.d620943db19c6c6f477d78c3e6dcfb1b.jpg

Irons- Sub70 649 MB Tour 5-PW, 699 Pro 2U  08e84065c69a5a06ed8fec52d91a.jpg.08662cdc8041ba1124fe725b926a5e95.jpg

Wedges- Cleveland Zipcore RTX 52°,56°, 60°  default_cleveland-small.jpg.0615c53919b7f92c3524630e353b33bb.jpg

Putter- Scotty Cameron Special Select Newport 2 default_cameron-small.gif.dd99234f0267bb38c40c23053034a445.gif

Ball- Titleist ProV1x default_titelist-small.jpg.d620943db19c6c6f477d78c3e6dcfb1b.jpg  

 

 

 

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...
On 1/26/2021 at 8:41 PM, JoshAndersonGolf said:

Here are some photos at address.

60*
IMG_3126.JPG

54*
IMG_3127.JPG

50*
IMG_3128.JPG


Sent from my iPhone using MyGolfSpy

Best wedges you've ever owned??

 

  • Like 2

Right handed golfer from Austin, Texas (Handicap: 8.1)

Driver: Titleist 907D2 (9.5 degree with stiff shaft)

Fairway Wood: Tayormade RocketBallz Stage 2 (3 Wood)

Hybrid: Cleveland CG Black (2 Iron)

Irons: Mizuno MP20 MMCs (Standard length and lie with stiff steel shafts)

Wedges: Callaway MD3 and Sub70

Putter: Scotty Cameron California Coronado

Ball: Pro V1x

Link to comment
Share on other sites

I got my JB wedge over two weeks ago and the weather hasn't cooperated once on a day I was off.

  • Sad 2

:ping-small: Driver, G400 11* SR Flex

:taylormade-small: 3 Wood, SLDR  HL 17*  R Flex

:taylormade-small: 5 Wood, SLDR 19* R Flex

:cobra-small: 7 Wood, F6 22.5* R Flex

:Sub70: Irons, 699 Pro's S Flex (5 - AW)

:Sub70:  JB Wedge 56*

:cleveland-small: Wedge, CBX 60*

:odyssey-small: Putter, Marksman Fang 35"

Link to comment
Share on other sites

I am very impressed with the clubs. I had a couple clubs sent out for me to use during my fitting 699 pro, and the 639mb. They offer demo clubs for basically $100 refundable deposit+ sipping cost. The send out the 6 and 9 iron. They shipped fast. The 6 iron for the 699 had a damaged shaft that they offered to overnight another one unfortunately that was the day of my fitting. They had good flight and felt great. The new level 902 irons just worked better for me. I'm actually waiting for them to launch the 739x hybrid it has two adjustable weights. I'll definitely buying one of them this year. They also are launching TAIII irons made in collaboration with tommy armor the 3rd. They know what they are doing and offer some very good value.  The hybrid will be around $149 this year. Can put two in the bag for the price of one of the big names. 

  • Like 1

steelhead 9°, rbz 5w, ping awr 2 bc irons, isi irons, or nike vapor irons, cleveland 52°, 58°, 64° 2 ball putter.

Link to comment
Share on other sites

These irons are on my list this year...I’m definitely updating my irons....right now is between Sub70, Srixon ZX5, new Callaway Apex DCB and PXG 0211


Sent from my iPad using MyGolfSpy

  • Like 5

 

 

:callaway-small: XR Driver Matrix Ozik 8m3 Black Tie Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

PXG 0211 DC 5-PW Mitsubishi MMT 80 Shafts

:cleveland-small: RTX ZIPCORE 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 2.0 grip

:Snell: MTB

 

 



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to comment
Share on other sites

On 2/5/2021 at 6:53 PM, tyryska said:

Best wedges you've ever owned??

 

They feel great hitting them indoors.  It will be nice to get them onto the course and see how they do.  I am headed to FL to play this next weekend so I should have a good idea.  

  • Like 3

Driver: Taylormade M6 10.5*

FW: Callaway Steelhead Plus 4 wood

Hybrid: 18* 2 & 22* 4 Sub 70 949

Irons:  Sub 70 

639 CB 5 - 6

639 MB 7 - PW

Wedges: Sub 70

JB - 50* 54* & 60*

Putter: Odyssey 2-Ball Ten Arm Lock
Ball: Titleist Pro V1X
Handicap index:  +2.9

Instagram: joshandersongolf

Twitter: @jacustomgolf

Link to comment
Share on other sites

On 2/7/2021 at 5:39 PM, halliedog said:

Any word on if the TA III or 649 Tour MBs are coming any time soon?  If not might be time to pull the trigger on some New Level 623-Ms. 

Sub 70 TA III.jpg

Sub 70 649 Tour MB.jpg

I believe the raw finish versions of both will be available in the next week or two. Not 100% sure beyond that but the others shouldn't be too far behind. Unfortunately shipments have been getting split up and delayed all over the place.

  • Like 3
Link to comment
Share on other sites

I'm dying for the 289 satin wedges to be available.

  • Like 2

In the bag:
Driver: :titelist-small: TSi2 Project X HZRDUS Smoke Black RDX 6.0
Fairway: :Sub70: 939X 15° Project X Even Flow Blue 6.0
Hybrid: :Sub70: 939X 3 Hybrid Project X Even Flow Riptide 6.0
Irons: :wilson_staff_small: D7 Forged 4-GW Project X Catalyst 80 6.0
Wedge: :cleveland-small: Smartsole S
Putter :Sub70: Sycamore 005 Wide Blade
Bag: 
:Ogio: Alpha Convoy 514
Balls::Snell: MTB-X or Black

Cart: :CaddyTek: CaddyLite ONE Ver. 8


God Bless America🇺🇸, God save the Queen🇬🇧, God defend New Zealand🇳🇿 and thank Christ for Australia🇦🇺!

Link to comment
Share on other sites

these look awesome! 

  • Like 2

Driver- Cobra Speedzone 9° default_cobra-small.jpg.bf0039c0fa211a003217e70e184035fa.jpg

Woods- Sub70 Pro 5-Wood   08e84065c69a5a06ed8fec52d91a.jpg.08662cdc8041ba1124fe725b926a5e95.jpg  

Utility- Titleist 718 T-MB 4 Utility  default_titelist-small.jpg.d620943db19c6c6f477d78c3e6dcfb1b.jpg

Irons- Sub70 649 MB Tour 5-PW, 699 Pro 2U  08e84065c69a5a06ed8fec52d91a.jpg.08662cdc8041ba1124fe725b926a5e95.jpg

Wedges- Cleveland Zipcore RTX 52°,56°, 60°  default_cleveland-small.jpg.0615c53919b7f92c3524630e353b33bb.jpg

Putter- Scotty Cameron Special Select Newport 2 default_cameron-small.gif.dd99234f0267bb38c40c23053034a445.gif

Ball- Titleist ProV1x default_titelist-small.jpg.d620943db19c6c6f477d78c3e6dcfb1b.jpg  

 

 

 

 

 

 

 

Link to comment
Share on other sites

On 2/9/2021 at 12:07 PM, GolfSub70 said:

I believe the raw finish versions of both will be available in the next week or two. Not 100% sure beyond that but the others shouldn't be too far behind. Unfortunately shipments have been getting split up and delayed all over the place.

Well of course they'll be available in a few weeks right after I pulled the trigger on NL 623-M 🤯 (their Super Bowl 15% off promo was too much to resist).

Interesting similarities between 623-M and TA III, other than some different milling on the back heel/toe.  Seems to lend some credibility to those saying these are all outsourced blanks with some custom milling/stamping "finishing touches"?  I do think the extended weight pads on heel/toe of TA III might add to some perimeter weighting increasing MOI/forgiveness. 

Comparison pics:

623M.png.8a37083945d00f13c815dc3763858dc4.png

1498112298_Sub70TAIIIPorts.jpg.08f923271403aadc0480945ea4566496.jpg

 

Question to @GolfSub70 if you happen to know - the "porting" on the TA IIIs?  Seems to be random (some possibly weight-filled ala PXG, some just open ports), was this done on the fly to adjust SW while these were in Proto stage, or does it serve some greater purpose and will that be the way it is rolled out for purchase (like tungsten plugs in the toes of long irons)?  Any idea if these will be along the same price line as the 639 MB/CB?  Might be fun to do a shootout between the 2 once they finally come out!

623M.png

Sub 70 TA III.jpg

  • Like 4
Link to comment
Share on other sites

3 hours ago, halliedog said:

Well of course they'll be available in a few weeks right after I pulled the trigger on NL 623-M 🤯 (their Super Bowl 15% off promo was too much to resist).

Interesting similarities between 623-M and TA III, other than some different milling on the back heel/toe.  Seems to lend some credibility to those saying these are all outsourced blanks with some custom milling/stamping "finishing touches"?  I do think the extended weight pads on heel/toe of TA III might add to some perimeter weighting increasing MOI/forgiveness. 

Comparison pics:

623M.png.8a37083945d00f13c815dc3763858dc4.png

1498112298_Sub70TAIIIPorts.jpg.08f923271403aadc0480945ea4566496.jpg

 

Question to @GolfSub70 if you happen to know - the "porting" on the TA IIIs?  Seems to be random (some possibly weight-filled ala PXG, some just open ports), was this done on the fly to adjust SW while these were in Proto stage, or does it serve some greater purpose and will that be the way it is rolled out for purchase (like tungsten plugs in the toes of long irons)?  Any idea if these will be along the same price line as the 639 MB/CB?  Might be fun to do a shootout between the 2 once they finally come out!

623M.png

Sub 70 TA III.jpg

 

Thanks for the message.  The set shown is TAIII's personal set...so he did some additional porting to get everything exactly to his specs.  The version we'll have available will have the ports on the 3, 4 and 5 irons.  There is some additional toe weighting in the mid/short irons so that you can go at them a bit harder and prevent the left miss on scoring irons.  The TAIII's will be $990 for a 4-W set and come with a full package of cool extras.  The 649 MB Tour that we are releasing will be priced the same as our current CB/MB ($644 for 4-W with no upcharge shafts/grips).  The general head design concept has been around a long time...the weight distribution just flat out works for a forged iron and the better player.  

  • Like 3
Link to comment
Share on other sites

18 hours ago, halliedog said:

Well of course they'll be available in a few weeks right after I pulled the trigger on NL 623-M 🤯 (their Super Bowl 15% off promo was too much to resist).

Interesting similarities between 623-M and TA III, other than some different milling on the back heel/toe.  Seems to lend some credibility to those saying these are all outsourced blanks with some custom milling/stamping "finishing touches"?  I do think the extended weight pads on heel/toe of TA III might add to some perimeter weighting increasing MOI/forgiveness. 

Comparison pics:

623M.png.8a37083945d00f13c815dc3763858dc4.png

1498112298_Sub70TAIIIPorts.jpg.08f923271403aadc0480945ea4566496.jpg

 

Question to @GolfSub70 if you happen to know - the "porting" on the TA IIIs?  Seems to be random (some possibly weight-filled ala PXG, some just open ports), was this done on the fly to adjust SW while these were in Proto stage, or does it serve some greater purpose and will that be the way it is rolled out for purchase (like tungsten plugs in the toes of long irons)?  Any idea if these will be along the same price line as the 639 MB/CB?  Might be fun to do a shootout between the 2 once they finally come out!

623M.png

Sub 70 TA III.jpg

I have to admit I also priced out those New Levels when they had that deal and it was less that 900 for a 7 piece set with MMTs, seemed like a good deal to me, hope you like them. The TAIII looks great too, not that my game is anywhere close to being able to handle them.

  • Like 2

:callaway-small: Epic Max LS 9° HZRDUS Smoke Black 70g 6.5 (2021 Official Review) | :taylormade-small: '07 Burner 15° Reax 50 Stiff 

:titelist-small: 816 H1 18° :Fuji: Speeder HB 8.8 Stiff | :titelist-small: 816 H1 21° Mitsubishi Diamana S+ Blue 70 Stiff

:mizuno-small: 5 - PW JPX 919 HM Pro :Fuji:  Pro Tour Spec 115i Stiff | :Hogan: Equalizer 52° / 56° KBS Tour V 110 Stiff

:cleveland-small:  SOFT 11S Super Stroke Mid-Slim 2.0 | :ping-small: Hoofer Bag | :titelist-small: Left Dash Pro V1x| Right Handed

Tracked by :ShotScope:

Link to comment
Share on other sites

On 2/5/2021 at 6:10 PM, Tom the Golf Nut said:

I got my JB wedge over two weeks ago and the weather hasn't cooperated once on a day I was off.

Think I'm going to order 2 up. Any play with yours yet? 

  • Like 1

WITB:

Driver:   :taylormade-small: SIM2 Max 12° - Accra TZ6 M4

FW Wood:    :cobra-small: F7 17.5° - Fujikura Pro

Utility:    :cobra-small: King Forged 20.5° Utility - Catalyst X

Irons:   image.png.cbfb2d938ea45d82004d9bdeb23cf643.pngD7 Forged GW-5i - Recoils

Wedges:   :Sub70:  JB 52° , 286 56°

Putter:   :taylormade-small: MySpider X

Cart: image.png.5aa5e9b8c0d6e08a2b12be76a06a07ca.pngOnewheel XR+

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...