Jump to content

Recommended Posts

Our Sponsors

Got a NEW set of irons with graphite shafts, but don't like the midsize grip installed. Any way to remove it without scratching the graphite shaft? Looked on the tube and just can't see myself sticking a rod or tool in between the shaft and grip and then twisting it until you could pull it off. Steel shaft yes, but graphites no, or will the tape inside protect the shaft.

 

Sent from my SM-G955U using MyGolfSpy mobile app

WITB:

 

Driver:   :cobra-small: F9 driver 9* stiff shaft 

FW Wood:   :cobra-small:  F9 wood 14.5* regular shaft

Hybrids:  :nike-small: Vapor Flex  3 hybrid regular shaft 

Irons:  :srixon-small: Z565 - 7 thru PW & ZU85 - 5 thru 6 with Recoil ZT9 F4 shafts                                            

Wedges:   :cleveland-small: RTX4 52*, 56*, 60* 

Putter:  Ben Hogan BHB01 blade

Ball:  :Snell: Black

Bag: 2015 Ogio Chamber Cart Bag & 2018 MyGolfSpy Stand Bag

 

 

Link to post
Share on other sites

If you get a pump with a needle on the end, you can inject grip tape solvent between the grip and shaft and they will slide right off.

 

 

Sent from my iPhone using MyGolfSpy

  • Like 2

In my ATumSBM.jpg Pisa, riding on a hXf3ptG.jpg 3.5+

:ping-small: G410+
:755178188_TourEdge: EXS 5W
:cobra-small: King F7 Hy

:ping-small: i500 5-GW
wxW5hk4.jpg Equalizer 56/60
:ping-small: Heppler Ketsch

Link to post
Share on other sites

If you have a hook blade on your utility knife you won't nick the graphite. It's worth the few bucks it takes to buy that blade at hardware store.

 

Sent from my Nexus 6P using MyGolfSpy mobile app

  • Like 3

:callaway-small: Rogue SZ 10.5 *NEW* Fujikura Pro Green 65 X

:callaway-small: Rogue 15 degree Evnflow Blue 6.5

Back in the Bag :srixon-small: Z765 4-G Nippon Modus 120 Stiff

:vokey-small: 54 and 60

 

:bobby-grace-1: Amazing Grace Ass Kicker

 

Link to post
Share on other sites

Air compressor with some solvent will also work.

  • Like 1

Driver:  :ping-small: G400 Max 9* w/ KBS Tour Driven
Fairway: :titelist-small: TS3 15* set  to 16.5* w/Project X Hzardous Smoke
Hybrids:  :titelist-small: 816H1 19* set at 18* w/KBS Tour Graphite Hybrid Prototype
                :titelist-small: 915H  21*  w/KBS Tour Graphite Hybrid Prototype
               :titelist-small: 915H 24*  w/KBS Tour Graphite Hybrid Prototype
Irons:      :honma:TR20V 6-11 w/Vizard TR20-85 Graphite
Wedge:  :cleveland-small: 588 54-14, 58-12
Putter:  :odyssey-small: Ten S      Backups:  :bobby-grace-1: 6330,   :EVNROLL: ER2.2,  

 

Member:  MGS Hitsquad since 2017697979773_DSCN2368(Custom).JPG.a1a25f5e430d9eebae93c5d652cbd4b9.JPG

 

Link to post
Share on other sites

Got a NEW set of irons with graphite shafts, but don't like the midsize grip installed. Any way to remove it without scratching the graphite shaft? Looked on the tube and just can't see myself sticking a rod or tool in between the shaft and grip and then twisting it until you could pull it off. Steel shaft yes, but graphites no, or will the tape inside protect the shaft.

 

Sent from my SM-G955U using MyGolfSpy mobile app

Sorry let me rephrase, I actually would like to save these midsize grips because they are still new.

 

Sent from my SM-G955U using MyGolfSpy mobile app

WITB:

 

Driver:   :cobra-small: F9 driver 9* stiff shaft 

FW Wood:   :cobra-small:  F9 wood 14.5* regular shaft

Hybrids:  :nike-small: Vapor Flex  3 hybrid regular shaft 

Irons:  :srixon-small: Z565 - 7 thru PW & ZU85 - 5 thru 6 with Recoil ZT9 F4 shafts                                            

Wedges:   :cleveland-small: RTX4 52*, 56*, 60* 

Putter:  Ben Hogan BHB01 blade

Ball:  :Snell: Black

Bag: 2015 Ogio Chamber Cart Bag & 2018 MyGolfSpy Stand Bag

 

 

Link to post
Share on other sites

Sorry let me rephrase, I actually would like to save these midsize grips because they are still new.

 

Sent from my SM-G955U using MyGolfSpy mobile app

The needle and solvent will help you save the grips. It's kind of a tricky process so I definitely recommend watching someone do it on YouTube first. The key is to use more solvent than you think is necessary.

 

Even still it'll take a good bit of elbow grease.

 

 

Sent from my iPhone using MyGolfSpy

  • Like 2

In my ATumSBM.jpg Pisa, riding on a hXf3ptG.jpg 3.5+

:ping-small: G410+
:755178188_TourEdge: EXS 5W
:cobra-small: King F7 Hy

:ping-small: i500 5-GW
wxW5hk4.jpg Equalizer 56/60
:ping-small: Heppler Ketsch

Link to post
Share on other sites

I'll second the air compressor and solvent solution.

  • Like 1

 

:cobra-small: King F7+ UST Mamiya Chrome Elements 6F4 Shaft

:cobra-small: King F7 3W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 5W UST Mamiya Chrome Elements 7F4 Shaft

:cobra-small: King F7 4 Hybrid Graphite Designs Tour AD-HY 95 Shaft

:cobra-small: King F7 5 Hybrid Graphite Designs Tour AD-HY 95 Shaft

:cobra-small: King F7 6-PW UST Mamiya Recoil 95 Shafts

:cobra-small: King PuR Wedges 50*,54*,58* UST Mamiya Recoil 95 Shafts

:odyssey-small: Metal X Milled #7 with SuperStroke 3.0 grip

Arccos Generation 1 Sensors on all clubs

Snell MTB



Twitter: @timldotson
Instagram: timldotson
Facebook: TimDotson

Link to post
Share on other sites

I bought one of those grip removal tools from Amazon for like $20 I believe. It has already paid for itself several times. So easy to remove, changing grips is a breeze now.

  • Like 1

:ping-small: G400 Max

:ping-small: G410 3W

:ping-small: G410 3 & 4 Crossover

:ping-small: i200 5-PW

:vokey-small: Vokey SM7 | 52-56-60

:taylormade-small: Taylormade Spider X

 

 

Link to post
Share on other sites

PS.. did this with my driver, 3W, and my buddies drivers and never harmed the shafts.

  • Like 2

:ping-small: G400 Max

:ping-small: G410 3W

:ping-small: G410 3 & 4 Crossover

:ping-small: i200 5-PW

:vokey-small: Vokey SM7 | 52-56-60

:taylormade-small: Taylormade Spider X

 

 

Link to post
Share on other sites

Got a NEW set of irons with graphite shafts, but don't like the midsize grip installed. Any way to remove it without scratching the graphite shaft? Looked on the tube and just can't see myself sticking a rod or tool in between the shaft and grip and then twisting it until you could pull it off. Steel shaft yes, but graphites no, or will the tape inside protect the shaft.

 

Sent from my SM-G955U using MyGolfSpy mobile app

Don't sweat it. Use a hook-blade and cut them right off. Easy as pie.

  • Like 1

My Sun Mountain bag currently includes:   TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 771CSI 5i - PW and TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png PFC Micro Tour-c 52°, 56°, 60 wedges

                                                                               :755178188_TourEdge: EXS 10.5*, TWGTLogo2.png.06c802075f4d211691d88895b3f34b75.png 929-HS FW4 16.5* 

                                                                                :edel-golf-1: Willimette w/GolfPride Contour

 

Link to post
Share on other sites

Blow them off with air

  • Like 1

In The Bag
Driver: TaylorMade M2 (2017) w/ Project X T1100 HZRDUS Handcrafted 65x 
Strong 3 wood: Taylormade M1 15* w/ ProjectX T1100 HZRDUS handcrafted 75x
3 Hybrid: Adams PRO 18* w/ KBS Tour Hybrid S flex tipped 1/2"
4 Hybrid: Adams PRO 20* (bent to 21*) w/ KBS Tour Hybrid S flex tipped 1/2"
4-AW: TaylorMade P770 w/ Dynamic Gold Tour Issue Black Onyx S400

SW: 56* Scratch Tour Dept(CC grooves) w/ Dynamic Gold Spinner
LW: 60* Scratch Tour Department (CC grooves) w/ Dynamic Gold Spinner
XW: 64* Cally XForged Vintage w/ DG X100 8 iron tiger stepped
Putter: Nike Method Prototype 006 at 34"

Have a ton of back-ups in all categories, but there are always 14 clubs in the bag that differ depending on the course and set-up. Bomb and gouge. Yes, I'm a club gigolo.

Link to post
Share on other sites

If you have a hook blade on your utility knife you won't nick the graphite. It's worth the few bucks it takes to buy that blade at hardware store.

 

Sent from my Nexus 6P using MyGolfSpy mobile app

Exactly. That's what I always use.

 

Sent from my SM-T580 using MyGolfSpy mobile app

  • Like 1

2017  :taylormade-small: M1 460, Project X HZRDUS Black 6.0

:mizuno-small: JPX EZ 3 wood
:cobra-small: Fly-Z 4H
:mizuno-small: MP-60, 3i-PW, True Temper Dynamic Gold
:mizuno-small: S5 54° & 58°, True Temper Dynamic Gold
:cameron-small: California Monterey
:titelist-small: Pro V1x

Link to post
Share on other sites

Exactly. That's what I always use.

 

Sent from my SM-T580 using MyGolfSpy mobile app

But you don't get to save them this way, that's the downside.

  • Like 2

:ping-small: G400 Max

:ping-small: G410 3W

:ping-small: G410 3 & 4 Crossover

:ping-small: i200 5-PW

:vokey-small: Vokey SM7 | 52-56-60

:taylormade-small: Taylormade Spider X

 

 

Link to post
Share on other sites

A lot depends on how they were installed.  2" grip tape?  Easy with a needle and injector.  3/4" spiraled tape, good luck!  

  • Like 1

Tour Issue Callaway GBB Epic Sub Zero 9° / Graphite Design P9003 TX  OR  Tour Issue Taylormade M1 430 9.5° / Graphite Design P9003 TX                        

Tour Issue Callaway XHot 3 Deep 13° / Graphite Design DI-10 TX                    Tour Issue Callaway XHot 3 Deep 13° / Project X T1100 95g 6.5

Tour Issue Titleist 915Hd 17.5° / Graphite Design DI-105 X                                Tour Issue Callaway BB Alpha 815 18° / Graphite Design DI-105 X

Scratch AR-1 v2 3-PW / Tour Issue Dynamic Gold X7                                        Raw Bridgestone J15CB 3-PW / Tour Issue Dynamic Gold X7

Scratch FIT 54°DS and 60°DS / Tour Issue Dynamic Gold X7                            Bettinardi H2 Forged 54° and 60° / Tour Issue Dynamic Gold X7        

Rotating 8802 style putters

Link to post
Share on other sites

Guess it would also depend if this was a 1 time project or something you were looking to do regularly until you figured out which grip you liked ($$$).

 

https://www.golfworks.ca/pressurized-golf-grip-remover/p/GS6/

 

This remover works well, you could also use it with an air compressor, but it will remove the grip safely on its own, ready to use again, in like 10 seconds.

  • Like 1

RBZ 10.5* driver

DTG Turner H-1 4/5/7 woods

Titleist AP1 irons

TM Tour Preferred wedges (50/54/58)

Hannah C curve putter

My swing speed is on the cusp, stiff flex driver, working down to a regular flex in the irons.

Link to post
Share on other sites

Never tried saving the grip, my coach always says a syringe with a bit of gasoline under it should get rid of the tape but like I said I've never done it myself. I've never had issues using a razor to cut the grip off on graphites, just don't gouge into it.

 

 

Sent from my iPhone using MyGolfSpy

  • Like 1

Right Handed

4.5 handicap

Driver: Nike Vapor Flex with Mitsubishi Rayon Fubuki ZT60x5ct S-flex shaft and stock grip.

3-Metal: Nike VRS 15 degree with Mitsubishi Rayon tour issue Diamana S73x5ct X-flex shaft and GolfPride MCC midsize Black/White grip.

Irons: Ben Hogan PTx 22, 26, 30, 34, 38, 42, 46 degrees standard length and lie with KBS Tour-V stiff shafts and GolfPride MCC midsize Black/White grips.

Wedges: Ben Hogan TK15 54, 58 degrees with KBS Tour-V X-flex shafts and GolfPride MCC midsize Black/White grips.

Putter: Nike Method Converge B1|01 with Superstroke Flatso 2.0 grip.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...